Our standard 14L layers stackup is the most common options selected by most PCB designers. The standard 14 layer stackup can be utilized in most applications for multilayer PCB board.
As the standard options, you can get a variable 14 layer stack up from Weller’s engineering suggestion, which is defined by following with 3 options :
| PCB thickness: | 2.0mm/2.5mm/3.0mm |
| Final finished copper thickness: | 1/1/1/1/1//1/1/1/1/1/1/1/1/1oz (Note: the out layer copper thickness below is base copper thickness) |
| Base material: | Tg170 (Recommend) |
| Remark | The Prepreg thickness could be adjusted according to track distribution |
Above stack up is our 3 options of standard 14L layer PCB buildup that upon the best manfuacturing features(quality and price).
We recommend PCB designers to use Tg170 laminate material for multilayer PCB (>= 6 layers) to avoid any potential quality problem during your PCB assembly process: such as layers delamination,blister in lead free assembly process,etc.
Above stack up options is our standard 14L layer buildup with 1/1/1/1/1/1/1/1/1/1/1/1 oz final finished copper thickness that the upon best manufacturing features for multilayer rigid PCB.
If you need custom stack up or stack up with impedance control for 14L circuit board,or you need 2oz or upper copper thickness PCB stack up, you can send your request to [email protected].