PCB SMT assembly process apparently looks like much more simple and easy than PCB fabrication process. But it is not so simple to avoid some hidden issues in SMT process which could be explored only by exact project running.
In WELLER, except that quality is always our first consideration, to each product, we gather all our brains to have a global analysis and round up the potential risk in production and after market.
The PCB assembly production flow chart below illustrates ways the WELLER process is safe or goes beyond the normal standard.
If you cannot find the answers that you are expecting, or would like to get more details, then please freely contact us and our team would be more than happy to assist.
When you order PCBAs from WELLER, you are buying quality that pays for itself over time.
Our team will double review the terms and specification presented or related in your order. This is to make sure your product specifications and quality controls are thoroughly understood by us, and to ensure that the product delivers what it promises.
WELLER will not change any specification unless get official approval from customer. This action are far more stringent than those of other suppliers.
IMQC (incoming material check), this is to have a global inspection to incoming material (component, PCB board,stentcil tooling),to make sure each material match the specification.
WELLER’s value: we always perform the BOM check list to make sure that the incoming components 100% conform it’s specification in BOM, and the size match it’s pattern on the PCB board.
All the components must be original parts as customer specified, no any alternatives without customer’s official approval.
This is a premise but core work to make sure the production moved forward correctly.
It is a tooled aluminum foil (or stainless steel foil) with opening window cut by laser, to simply transfer the solder paste via this window to the surface of SMD pad on the bare circuit board.
The quality of stencil is most important of high quality PCB assembly, all WELLER’s stencil is tooled by high quality of aluminum material with high precious laser cut process with REDUCE ALL APERTURES BY 10%.
Refer WELLER-SMT-Stencil-Technical-Specification
It is to load all the purchased SMD components by roll or tape into the feeders of SMT machine, the feeder location must conform to the components in pick and place file.
It is to transfer bare PCB board to the assembly process automatically.
All the bare PCB board load machine in WELLER is automatically controlled rather than manual transferring work in other supplier.And,this directly lead to the production efficiency and capacity improved.
Solder paste printing is a core step in the SMT (Surface Mount Technology) assembly process.
It is to print the solder paste via stencil on the every one of the pads on the PCB board which need to be components soldered on. This work normally done by high quality solder printing machine or by manual work.
The two key points on this process is paste print machine and the material of solder paste.
In WELLER, All the soldering printing work is done by automatic machine which have high-accuracy positioning and high-speed printing and highly stable quality than other suppliers who do this by manual work to avoid affording the high cost of buying Auto-printing machines.
And, all the solder paste we used is from ALPHA-OM-340, which have a most stable quality than other brand solder paste. And can apply to different end application of products (industrial PCB assembly, communication PCB assembly, medical PCB assembly,etc)
SPI means Solder Paste Inspection in PCB assembly industry. It’s work purpose is to check the solder paste deposits on the SMD component pads of bare printed circuit boards (PCBs) before loading the components on it . This is to sort out the potential flaws from solder paste printing process before forma SMT assembly.
All the assembly lines in WELLER is matched with SPI machine, this is much more safe and high quality rather than most other suppliers who do not use any SPI or just make solder paste inspection by eyes.
SMT (surface mounted technology) assembly is one of important part of PCB assembly process.
It is to mount the electrical components (surface mounted device) onto the surface of a bare printed circuit board.
In WELLER, all the SMT machines in production line is from Juki with it’s latest model to ensure high accurate and high efficiency production work.No eed to subcontract work to outsource which other supplier do.
Universal SMT assembly which is a supplement to the regular assembly.
This is to assemble some un-regular shape size of components by unique assemble machine.
The production efficiency can be highly improved by this universal assembly optimizing process.
Reflow soldering is an important part of assembly process by which the molten state solder paste will turn to the permanent solder joints. So as that the SMD components is soldered on the SMT pad of the bare printed circuit board.
After this process, the components has been fully soldering jointed with it’s SMT pad under them.
In Weller, we are using latest 12 temperature zones solder reflow machine to ensure the high quality soldering performance, especially for some fine pith and high density BGAs. And, all production record of soldering profile is kept 1 month at least for available traceability unless spherical request from customer. Which is better than other suppliers who do not have any production record backup.
AOI (Automated optical inspection) is an important step of inspection in circuit board assembly process, it is an automated visual inspection of PCB(printed circuit board) assembly where a camera autonomously scans the SMD components under test for both catastrophic failure (e.g. missing component) and quality defects (e.g. fillet size or shape or component skew). This is a critical inspections process to ensure good quality of PCB assemblies.
In Weller, all the assembly production lines is equipped by AOI machine. All the PCB assembly production (even each prototypes) is implemented AOI inspection, rather than other suppliers who use manual power (by eyes) to have a visual inspection to the board.
Automated X-ray inspection (also called AXI) is another important part of PCB assembly process;it is a technology based on the similar principles as automated optical inspection (AOI).
It is to uses X-rays as its source to automatically inspect the defects or features which are typically hidden from the positive view.
In WELLER,all the assembly soldering on BGA component, fine pitch components and QFN components must be done with X ray inspection with the machine equipped at our own house, and all the inspection record is backup in our system available for traceability. Rather than other supplier who do not have x-ray inspection machine and have to subcontracted it to outsource or do not do X-ray inspection at all and pass the defects or failures the customers.
PCB Dip assembly is also called through hole components soldering process, it is to assemble though hole components by peak wave soldering process or by manual soldering work.
In WELLER, we have our own peak soldering process at house, this will improve the production efficiency and capacity accordingly once large amount of DIP production requested from customer.
So this will be the time saved and quality controlled rather than the other supplier who subcontracted this process to outsources.
Functional test is to power on the assembled PCB board with firmware programmed in.
This is to dig out some hidden problem which escaped from the inspection in AOI and X-ray. This is best safe option to make sure customer to receive the ordered PCB assemblies at correct quality.
In WELLER, commonly we suggest customer to accept our request to firmware and power on their boards to implement a electrical function test, and do repair once some defects found at our house accordingly. So as that all the problem can be killed at our own house and not let them go to customer. Rather than other supplier who do not do any recommendation of functional test and the projects sometimes catch file when customer power on their boards after receipt.
All the PCB assemblies from Weller is packed in ESD bags based material friendly to environment.
And, all the carton box package must be enough strong defend the stock and potential damage from delivery process.
